All Tutorials
AutoCAD Tutorials - The Basics
AutoCAD 2010: The User Interface - Part 1
This video tutorial takes you on a guided tour of the AutoCAD 2010 user interface. This is the best place to start for beginners. Running time: 3min 56sec
Popularity: 59.51 visits per day | Last visit: Today | Total visits: 329,517
AutoCAD 2010: The User Interface - Part 2
This video tutorial continues your guided tour of the AutoCAD 2010 user interface. Running time: 3min 20sec
Popularity: 24.01 visits per day | Last visit: Today | Total visits: 132,898
AutoCAD 2010: The User Interface - Part 3
This video tutorial completes your guided tour of the AutoCAD 2010 user interface. Running time: 4min 04sec
Popularity: 20.24 visits per day | Last visit: Today | Total visits: 112,037
AutoCAD 2010: Ribbon Basics
This video tutorial introduces you to the AutoCAD 2010 ribbon and demonstrates the various options you have when working with it. Running time: 5min 49sec
Popularity: 24.01 visits per day | Last visit: Today | Total visits: 133,980
AutoCAD 2010: Starting a Command
This video tutorial demonstrates some of the methods for starting a command in AutoCAD. Running time: 2min 42sec
Popularity: 21.63 visits per day | Last visit: Today | Total visits: 120,707
Drawing Objects
Getting to grips with AutoCAD's basic drawing tools. This is an ideal start for the AutoCAD beginner.
Popularity: 242 visits per day | Last visit: Today | Total visits: 1,632,667
Object Selection
This tutorial shows you the many ways AutoCAD objects can be selected. Covers the building of selection sets with implied windowing, fences etc.
Popularity: 61.65 visits per day | Last visit: Today | Total visits: 415,914
Modifying Objects
This tutorial runs through all of the modify tools, demonstrating practical examples in each case.
Popularity: 112.3 visits per day | Last visit: Today | Total visits: 757,623
AutoCAD 2010: Joining Lines, Polylines and Arcs
This video tutorial demonstrates how to join lines, polylines and arcs using the Join command and the Edit Polyline command. Running time: 6min 49sec
Popularity: 29.69 visits per day | Last visit: Today | Total visits: 165,633
Direct Distance Entry
The essential way of working with AutoCAD
Popularity: 50.73 visits per day | Last visit: Today | Total visits: 342,253
Drawing Aids
All about drawing aids.
Popularity: 62.58 visits per day | Last visit: Today | Total visits: 422,193
Units and Scales
If you're asking yourself "what scale do I draw in?" or "what units should I use?", you need this tutorial.
Popularity: 127.91 visits per day | Last visit: Today | Total visits: 862,996
Using Co-ordinates
All about the use of co-ordinates in AutoCAD.
Popularity: 60.9 visits per day | Last visit: Today | Total visits: 410,870
Object Snap
A tutorial giving an overview of all the AutoCAD object snaps (osnaps) with some worked examples. The tutorial also covers the use of temporary tracking points and object snap tracking.
Popularity: 96.17 visits per day | Last visit: Today | Total visits: 648,812
Object Properties
This tutorial describes how to control the display of objects (colour, linetype etc.) using layers. It also explains what layers are and how they should be used.
Popularity: 63.04 visits per day | Last visit: Today | Total visits: 425,290
Masterplan Exercise
This exercise can be used to practice your basic drafting skills.
Popularity: 33.86 visits per day | Last visit: Today | Total visits: 228,473
North Point Exercise
An exercise sheet, covering a range of basic skills including object snaps.
Popularity: 20.21 visits per day | Last visit: Today | Total visits: 136,354
Site Layout Exercise 1
This exercise is designed to help you test out your basic AutoCAD skills. You'll need an understanding of the Draw and Modify tools and how to use co-ordinates.
Popularity: 54.5 visits per day | Last visit: Today | Total visits: 367,720
AutoCAD Tutorials - Beyond Basics
Advanced Selection
After you've mastered the basics of selection, this tutorial shows you some powerful methods for making complex selection sets.
Popularity: 32.18 visits per day | Last visit: Today | Total visits: 217,136
User Co-ordinate Systems
This tutorial describes what UCSs are, why we need them and how to use them. The correct use of UCSs with AutoCAD is the key to producing good 3D models and they can also help with 2D work.
Popularity: 67.07 visits per day | Last visit: Today | Total visits: 452,479
Dimensioning
This tutorial describes the options and commands available for dimensioning drawings and how to use them. The correct use of AutoCADs dimension tools is the key to producing clear and concise measured drawings.
Popularity: 111.52 visits per day | Last visit: Today | Total visits: 752,398
The UCS Icon
All about the UCS icon.
Popularity: 35.45 visits per day | Last visit: Today | Total visits: 239,170
Using Images
A simple exercise to help you understand how images work in AutoCAD.
Popularity: 22.66 visits per day | Last visit: Today | Total visits: 152,898
Scaling Images
How to scale images in AutoCAD.
Popularity: 49.08 visits per day | Last visit: Today | Total visits: 331,123
All About Images
This tutorial tells you all you need to know about working with images in AutoCAD.
Popularity: 54.31 visits per day | Last visit: Today | Total visits: 366,395
ISO Paper Sizes
There has alwas been some confusion over the size of standard ISO drawing sheets with AutoCAD.The stated sizes in the plot dialogue box are not the true ISO sizes. This tutorial explains why and how to plot to scale from Model Space.
Popularity: 54.3 visits per day | Last visit: Today | Total visits: 366,322
Paper Space Exercise
AutoCAD's paper space mode is a bit like having a page in a scrapbook onto which you can paste different views of your AutoCAD drawing. This whole page can then be plotted. This exercise demonstrates how.
Popularity: 61.72 visits per day | Last visit: Today | Total visits: 416,387
AutoCAD Tutorials - Techniques
AutoCAD to Photoshop
This tutorial demonstrates a number of workflows from quick and simple to high quality.
Popularity: 64.62 visits per day | Last visit: Today | Total visits: 435,947
AutoCAD 2010: Joining Lines, Polylines and Arcs
This video tutorial demonstrates how to join lines, polylines and arcs using the Join command and the Edit Polyline command. Running time: 6min 49sec
Popularity: 29.69 visits per day | Last visit: Today | Total visits: 165,633
Setting up a PostScript Plotter
How to set up a PostScript Plotter.
Popularity: 29.39 visits per day | Last visit: Today | Total visits: 198,314
Scaling Images
How to scale images in AutoCAD.
Popularity: 49.08 visits per day | Last visit: Today | Total visits: 331,123
Adding Sunlight to your Drawings
This tutorial takes you through the steps required to add realistic sunlight effects to your 3D model.
Popularity: 25.83 visits per day | Last visit: Today | Total visits: 174,253
Creating Custom Bitmap Materials
This tutorial demonstartes how to create your own bitmap based materials using Photoshop and AutoCAD.
Popularity: 16.63 visits per day | Last visit: Today | Total visits: 112,218
Creating Seamless Tiles
This tutorial shows you how to create perfectly seamless image tiles in Photoshop. The image tiles are perfect for creating image based materials in AutoCAD, MAX or Bryce.
Popularity: 12.11 visits per day | Last visit: Today | Total visits: 81,680
AutoCAD to Bryce
This tutorial takes a step-by-step approach to moving your AutoCAD 3D models into Bryce, applying materials and creating a setting.
Popularity: 11.7 visits per day | Last visit: Today | Total visits: 78,919
Importing AutoCAD Meshes to Bryce
This tutorial describes how to create a triangular ground model using Key Terra-Firma and AutoCAD and how to import this ground model into Bryce.
Popularity: 6.89 visits per day | Last visit: Today | Total visits: 46,508
Perspectives, Slides and Scripts
AutoCAD can be used to create a simple "walk through" of any 3D model. This tutorial shows you how.
Popularity: 25.19 visits per day | Last visit: Today | Total visits: 169,976
Entering Survey Data using AutoCAD
These techniques apply to basic CAD programs such as AutoCAD, IntelliCAD, etc. If you have a civil/survey program or add-on, such as Land Desktop, SurvCADD, Eagle Point, etc., then there are built-in tools for entering lines and curves.
Popularity: 95.03 visits per day | Last visit: Today | Total visits: 625,014
AutoCAD Tutorials - 3D Basics
AutoCAD 2010: Getting Ready for 3D
This video tutorial describes how to prepare the AutoCAD 2010 user interface (UI) ready for a 3D drawing project. Running time: 2min 23sec
Popularity: 31.3 visits per day | Last visit: Today | Total visits: 172,837
AutoCAD 2010: The 3D Primitives
This tutorial follows on from the Getting ready for 3D tutorial and describes how each of the 3D primitives work. Running time: 15min 10sec
Popularity: 16.05 visits per day | Last visit: Today | Total visits: 88,470
AutoCAD 2010: Basic 3D Editing with Grips & Gizmos
This tutorial follows on from the 3D Primitives tutorial and describes how 3D solid objects can be edited using grips and gizmos. Running time: 11min 53sec
Popularity: 13.33 visits per day | Last visit: Today | Total visits: 73,294
AutoCAD 2010: The ViewCube
This tutorial introduces the ViewCube and describes how it can be used for effectively navigating your 3D drawings. Running time: 6min 13sec
Popularity: 9.16 visits per day | Last visit: Today | Total visits: 50,370
AutoCAD 2010: Ground Shadows
This tutorial explains how to turn ground shadows on and how they help in defining the relationship between 3D objects and the ground plane. Running time: 1min 55sec
Popularity: 7.79 visits per day | Last visit: Today | Total visits: 42,809
AutoCAD 2010: Subobject Editing with Filters
This tutorial introduces the subobjects (Face, Edge and Vertex), describes how best to select them and demonstrates how they can be edited. Running time: 15min 56sec
Popularity: 7.5 visits per day | Last visit: Today | Total visits: 40,757
AutoCAD 2010: Extrude & Press/Pull
This tutorial introduces the AutoCAD extrusion tools, Extrude and Press/Pull. A good understanding of both tools is important for developing 3D modeling skills. Running time: 9min 53sec
Popularity: 12.91 visits per day | Last visit: Today | Total visits: 69,788
AutoCAD 2010: 3D Move & 3D Rotate
This tutorial introduces two of the most useful Modify tools for 3D, 3D Move and 3D Rotate and demonstrates how powerful 3D Rotate can be when combined with Polar Tracking. Running time: 6min 35sec
Popularity: 8.86 visits per day | Last visit: Today | Total visits: 47,882
AutoCAD 2010: 3D Scale & 3D Align
This tutorial introduces the 3D Scale and 3D Align tools. Although 3D Scale is a bit of a damp squib, 3D Align is very powerful and can get you out of all sorts of scrapes if you know how to use it correctly. Running time: 3min 42sec
Popularity: 8.57 visits per day | Last visit: Today | Total visits: 46,308
AutoCAD 2010: 3D Mirror
This tutorial introduces the 3D Mirror tool. This is similar to the normal 2D Mirror tool but it enables you to define a mirror about and plane in 3D space and there are a number of command line options to help you define that plane. Running time: 3min 17sec
Popularity: 7.14 visits per day | Last visit: Today | Total visits: 38,553
AutoCAD 2010: 3D Array
This tutorial introduces 3D Array tool and covers both Rectangular and Polar arrays. Despite the fact that it doesn't have a neat dialogue box, like its 2D cousin, 3D Array is pretty easy to use and can be used to create some impressive results. Running time: 3min 34sec
Popularity: 8.31 visits per day | Last visit: Today | Total visits: 44,885
AutoCAD Tutorials - Modelling and Rendering
AutoCAD 2010: Getting Ready for 3D
This video tutorial describes how to prepare the AutoCAD 2010 user interface (UI) ready for a 3D drawing project. Running time: 2min 23sec
Popularity: 31.3 visits per day | Last visit: Today | Total visits: 172,837
Basic 3D and Surface Modelling
Although AutoCAD has a number of commands for creating special 3D objects, a lot can be achieved by changing the properties of basic 2D objects like polylines. This tutorial provides a basic introduction to creating and viewing 3D objects.
Popularity: 100.89 visits per day | Last visit: Today | Total visits: 680,645
3D Tree Exercise
The object behind this exercise is twofold. Firstly it is to give you practice with some of the 3D techniques which you have discovered in the tutorials or to introduce you to them if you haven't seen them before. Secondly it is to demonstrate a reasonably simple method for constructing a convincing 3D tree.
Popularity: 27.58 visits per day | Last visit: Today | Total visits: 186,045
Adding Sunlight to your Drawings
This tutorial takes you through the steps required to add realistic sunlight effects to your 3D model.
Popularity: 25.83 visits per day | Last visit: Today | Total visits: 174,253
All About Shadows
This tutorial considers the various options for creating shadows when rendering 3D models.
Popularity: 14.59 visits per day | Last visit: Today | Total visits: 98,451
Creating Custom Bitmap Materials
This tutorial demonstartes how to create your own bitmap based materials using Photoshop and AutoCAD.
Popularity: 16.63 visits per day | Last visit: Today | Total visits: 112,218
Creating Seamless Tiles
This tutorial shows you how to create perfectly seamless image tiles in Photoshop. The image tiles are perfect for creating image based materials in AutoCAD, MAX or Bryce.
Popularity: 12.11 visits per day | Last visit: Today | Total visits: 81,680
AutoCAD to Bryce
This tutorial takes a step-by-step approach to moving your AutoCAD 3D models into Bryce, applying materials and creating a setting.
Popularity: 11.7 visits per day | Last visit: Today | Total visits: 78,919
Perspectives, Slides and Scripts
AutoCAD can be used to create a simple "walk through" of any 3D model. This tutorial shows you how.
Popularity: 25.19 visits per day | Last visit: Today | Total visits: 169,976
AutoCAD Tutorials - Exercises
Site Layout Exercise 1
This exercise is designed to help you test out your basic AutoCAD skills. You'll need an understanding of the Draw and Modify tools and how to use co-ordinates.
Popularity: 54.5 visits per day | Last visit: Today | Total visits: 367,720
Site Layout Exercise 2
This exercise is designed to progress your skills in 2D drafting and to test your understanding of layouts and printing to scale from paper space.
Popularity: 17.52 visits per day | Last visit: Today | Total visits: 90,115
North Point Exercise
An exercise sheet, covering a range of basic skills including object snaps.
Popularity: 20.21 visits per day | Last visit: Today | Total visits: 136,354
Using Images
A simple exercise to help you understand how images work in AutoCAD.
Popularity: 22.66 visits per day | Last visit: Today | Total visits: 152,898
Masterplan Exercise
This exercise can be used to practice your basic drafting skills.
Popularity: 33.86 visits per day | Last visit: Today | Total visits: 228,473
3D Tree Exercise
The object behind this exercise is twofold. Firstly it is to give you practice with some of the 3D techniques which you have discovered in the tutorials or to introduce you to them if you haven't seen them before. Secondly it is to demonstrate a reasonably simple method for constructing a convincing 3D tree.
Popularity: 27.58 visits per day | Last visit: Today | Total visits: 186,045
Paper Space Exercise
AutoCAD's paper space mode is a bit like having a page in a scrapbook onto which you can paste different views of your AutoCAD drawing. This whole page can then be plotted. This exercise demonstrates how.
Popularity: 61.72 visits per day | Last visit: Today | Total visits: 416,387
AutoCAD Tutorials - AutoLISP
AutoLISP Quick Start
This tutorial is designed to help AutoCAD users get to grips with AutoLISP quickly. It demonstartes how to create AutoLISP routines from a standing start.
Popularity: 48.11 visits per day | Last visit: Today | Total visits: 258,117
AutoCAD Tutorials - Key TERRA-FIRMA
Ground Modelling
This tutorial describes how to create a 3D surface model from contour information using AutoCAD and Key TERRA-FIRMA.
Popularity: 12.73 visits per day | Last visit: Today | Total visits: 85,858
Volumetrics
This tutorial describes how to use Key TERRA-FIRMA to calculate volumes from ground models (.KGM files) and how to calculate cut and fill volumes between ground models.
Popularity: 6.62 visits per day | Last visit: Today | Total visits: 44,653
Creating and Drawing Sections
This tutorial describes how to draw sections using Key TERRA-FIRMA. The tutorial assumes that you have previously completed the Ground Modelling tutorial or that you already have a good understanding of TERRA-FIRMA ground modelling.
Popularity: 13.87 visits per day | Last visit: Today | Total visits: 93,556
AutoCAD Tutorials - Video Tutorials
AutoCAD 2010: The User Interface - Part 1
This video tutorial takes you on a guided tour of the AutoCAD 2010 user interface. This is the best place to start for beginners. Running time: 3min 56sec
Popularity: 59.51 visits per day | Last visit: Today | Total visits: 329,517
AutoCAD 2010: The User Interface - Part 2
This video tutorial continues your guided tour of the AutoCAD 2010 user interface. Running time: 3min 20sec
Popularity: 24.01 visits per day | Last visit: Today | Total visits: 132,898
AutoCAD 2010: The User Interface - Part 3
This video tutorial completes your guided tour of the AutoCAD 2010 user interface. Running time: 4min 04sec
Popularity: 20.24 visits per day | Last visit: Today | Total visits: 112,037
AutoCAD 2010: Ribbon Basics
This video tutorial introduces you to the AutoCAD 2010 ribbon and demonstrates the various options you have when working with it. Running time: 5min 49sec
Popularity: 24.01 visits per day | Last visit: Today | Total visits: 133,980
AutoCAD 2010: Starting a Command
This video tutorial demonstrates some of the methods for starting a command in AutoCAD. Running time: 2min 42sec
Popularity: 21.63 visits per day | Last visit: Today | Total visits: 120,707
AutoCAD 2010: Joining Lines, Polylines and Arcs
This video tutorial demonstrates how to join lines, polylines and arcs using the Join command and the Edit Polyline command. Running time: 6min 49sec
Popularity: 29.69 visits per day | Last visit: Today | Total visits: 165,633
AutoCAD 2010: Getting Ready for 3D
This video tutorial describes how to prepare the AutoCAD 2010 user interface (UI) ready for a 3D drawing project. Running time: 2min 23sec
Popularity: 31.3 visits per day | Last visit: Today | Total visits: 172,837
AutoCAD 2010: The 3D Primitives
This tutorial follows on from the Getting ready for 3D tutorial and describes how each of the 3D primitives work. Running time: 15min 10sec
Popularity: 16.05 visits per day | Last visit: Today | Total visits: 88,470
AutoCAD 2010: Basic 3D Editing with Grips & Gizmos
This tutorial follows on from the 3D Primitives tutorial and describes how 3D solid objects can be edited using grips and gizmos. Running time: 11min 53sec
Popularity: 13.33 visits per day | Last visit: Today | Total visits: 73,294
AutoCAD 2010: The ViewCube
This tutorial introduces the ViewCube and describes how it can be used for effectively navigating your 3D drawings. Running time: 6min 13sec
Popularity: 9.16 visits per day | Last visit: Today | Total visits: 50,370
AutoCAD 2010: Ground Shadows
This tutorial explains how to turn ground shadows on and how they help in defining the relationship between 3D objects and the ground plane. Running time: 1min 55sec
Popularity: 7.79 visits per day | Last visit: Today | Total visits: 42,809
AutoCAD 2010: Subobject Editing with Filters
This tutorial introduces the subobjects (Face, Edge and Vertex), describes how best to select them and demonstrates how they can be edited. Running time: 15min 56sec
Popularity: 7.5 visits per day | Last visit: Today | Total visits: 40,757
AutoCAD 2010: Extrude & Press/Pull
This tutorial introduces the AutoCAD extrusion tools, Extrude and Press/Pull. A good understanding of both tools is important for developing 3D modeling skills. Running time: 9min 53sec
Popularity: 12.91 visits per day | Last visit: Today | Total visits: 69,788
AutoCAD 2010: 3D Move & 3D Rotate
This tutorial introduces two of the most useful Modify tools for 3D, 3D Move and 3D Rotate and demonstrates how powerful 3D Rotate can be when combined with Polar Tracking. Running time: 6min 35sec
Popularity: 8.86 visits per day | Last visit: Today | Total visits: 47,882
AutoCAD 2010: 3D Scale & 3D Align
This tutorial introduces the 3D Scale and 3D Align tools. Although 3D Scale is a bit of a damp squib, 3D Align is very powerful and can get you out of all sorts of scrapes if you know how to use it correctly. Running time: 3min 42sec
Popularity: 8.57 visits per day | Last visit: Today | Total visits: 46,308
AutoCAD 2010: 3D Mirror
This tutorial introduces the 3D Mirror tool. This is similar to the normal 2D Mirror tool but it enables you to define a mirror about and plane in 3D space and there are a number of command line options to help you define that plane. Running time: 3min 17sec
Popularity: 7.14 visits per day | Last visit: Today | Total visits: 38,553
AutoCAD 2010: 3D Array
This tutorial introduces 3D Array tool and covers both Rectangular and Polar arrays. Despite the fact that it doesn't have a neat dialogue box, like its 2D cousin, 3D Array is pretty easy to use and can be used to create some impressive results. Running time: 3min 34sec
Popularity: 8.31 visits per day | Last visit: Today | Total visits: 44,885
3ds Max Tutorials - The Basics
The Interface
This tutorial gives a brief explanation of the MAX interface items commonly used and introduces you to the important areas of the interface.
Popularity: 15.4 visits per day | Last visit: Today | Total visits: 93,910
Scene Setup
Before attempting to create a scene it is important to understand global settings pertaining to any scene that will make modelling more efficient together with settings that pertain to individual scenes and stages in scene development. This tutorial explains Viewport Configuration options, Scene Settings and basic MAX / VIZ Configuration.
Popularity: 11.42 visits per day | Last visit: Today | Total visits: 69,655
Navigation Techniques
Gaining the skill to navigate efficiently around a scene and around objects and parts of objects (sub-objects) efficiently and with ease is of paramount importance to good modelling. Most new users of MAX / VIZ need to get over this first hurdle before feeling comfortable in the 3D environment. Fear not, MAX / VIZ has a host of tools for the purpose. This tutorial descibes the most useful navigation techniques.
Popularity: 8.1 visits per day | Last visit: Today | Total visits: 49,397
3ds Max Tutorials - Working with Objects
Options for Creating Objects
There are a number of ways of creating the three main elements of a landscape scene, surfaces, edges and objects, each one demending an understanding of the creation methods and tools at hand. This tutorial shows you how.
Popularity: 17.45 visits per day | Last visit: Today | Total visits: 106,007
Selection Methods
Keeping track of and selecting objects in a scene is a crucial part of 3D modelling. Develop a good strategy for naming, selecting, grouping and displaying objects before embarking on a project. This tutorial shows you the way.
Popularity: 11.86 visits per day | Last visit: Today | Total visits: 72,062
Transforming Objects
Transforming objects means changing the position, size or number of an object without altering the integrity of the geometry itself. MAX offers a host of transformation tools to do these tasks. This tutorial gets you started.
Popularity: 17.26 visits per day | Last visit: Today | Total visits: 104,854
Modifying Objects
Modification of objects is at the heart of 3D modelling. Once geometry has been created using the most appropriate method then the modeller will start the modification process. This comprehensive tutorial shows you how.
Popularity: 20.76 visits per day | Last visit: Today | Total visits: 126,089
Optimisation and Workflow
This tutorial discusses the various ways you can make your modelling work more efficient.
Popularity: 4.95 visits per day | Last visit: Today | Total visits: 30,092
3ds Max Tutorials - Create a 3D Landscape
Preparing an AutoCAD drawing for 3D
This tutorial explains the main issues to consider when drawing in AutoCAD and preparing a drawing for use in 3D work.
Popularity: 34.15 visits per day | Last visit: Today | Total visits: 207,424
Surfaces
The first and perhaps most crucial stage in creating a 3D landscape scene is the creation of accurate and seamless surfaces. This tutorial explores a number (not all) of techniques for creating quick and accurate surfaces from 2D lines and should give the user a feel for the range of tools available.
Popularity: 8.62 visits per day | Last visit: Today | Total visits: 52,360
Edges
Edges exist where one surface meets another. Usually an edge is a surface edge detail such as pavers, a retaining wall or stepped features such as steps or terracing. This tutorial explores ways of working with them to create 3D elements.
Popularity: 5.45 visits per day | Last visit: Today | Total visits: 33,082
Pavement Ramp and Car Park
A ramp surface created in a previous tutorial is rotated down to meet the bottom steps and the geometry edited to fit the steps. A car park is also formed using splines snapped to existing geometry.
Popularity: 5.1 visits per day | Last visit: Today | Total visits: 30,998
Planting Beds
This tutorial completes the sequence by adding planting beds to the scene using a Subvivide modifier.
Popularity: 3.84 visits per day | Last visit: Today | Total visits: 23,295
3ds Max Tutorials - Materials and Production
Cameras
Cameras are the main viewing tools in 3D visualisation. This tutorial demonstartes how to create and control cameras.
Popularity: 10.01 visits per day | Last visit: Today | Total visits: 60,787
Exterior Lighting
This tutorial shows you how to set up a standard Sunlight System using a target direct light and including ambient light and standard shadow map settings.
Popularity: 9.27 visits per day | Last visit: Today | Total visits: 56,318
Landscape Materials
Efficient landscape modelling demands the ability to create realistic looking surfaces, edges and objects quickly and precisely. This tutorial discusses the issues.
Popularity: 5.18 visits per day | Last visit: Today | Total visits: 31,447
The Material Editor
The Material Editor provides functions to create and edit materials and maps. This tutorial is a basic introduction to the options available.
Popularity: 18.5 visits per day | Last visit: Today | Total visits: 112,381
Map Modifying
Map modification takes place in one of two places: either on the Modify Panel with the use of one of two modifiers, or in the Material Editor as part of the material parameters. This tutorial guides you through the options.
Popularity: 9.17 visits per day | Last visit: Today | Total visits: 55,689
Standard none mapped materials
Standard none mapped materials are suitable for paint, plastics, metal and basic glass type objects. By choosing the correct shader, the most suitable parameters can be used to create the most appropriate effects. This tutorial shows you how.
Popularity: 3.51 visits per day | Last visit: Today | Total visits: 21,345
Standard mapped materials - Procedural Maps
Procedural maps use computer generated effects and are applied to materials for many different purposes. They have to be scaled and positioned on the object using a UVW Map modifier or a Map Scaler modifier. This tutorials uses a worked example to show you how.
Popularity: 6.2 visits per day | Last visit: Today | Total visits: 37,656
Standard mapped materials - Image Maps
Image maps are applied to materials for many different purposes. They have to be scaled and positioned on the object using a UVW Map modifier or a Map Scaler modifier. This tutorial steps you through the process.
Popularity: 6.77 visits per day | Last visit: Today | Total visits: 41,131
Multi/Sub-Object materials
A Multi/Sub-Object material is a container for a number of sub-materials. This type of material is used when you need to assign different materials to different parts of an object and is used in infrastructure and environment projects mainly for objects such as benches, tables, lamposts, buildings etc. This tutorial works through a number of examples.
Popularity: 16.64 visits per day | Last visit: Today | Total visits: 101,064
Loft Mapping
This tutorial follows on from the simple Loft tutorial in Options for Creating Objects and demonstrates how to map a material along a lofted object.
Popularity: 10.19 visits per day | Last visit: Today | Total visits: 61,857
Sky Backgrounds
Putting a scene into an "environment" is important, not least to generate a feeling of "outdoors", a "sense of place" or mood. This tutorial takes you through the process of applying a sky background.
Popularity: 17.36 visits per day | Last visit: Today | Total visits: 105,450
Editing and Saving Materials
Once materials have been created and edited in the Material Editor to suit a particular scene they no longer need to be kept in the Materials Editor. Materials can be saved in material libraries and retreived for use in any other scene. This tutorial shows you how.
Popularity: 17.54 visits per day | Last visit: Today | Total visits: 106,489
Animation
Design visualisation animation generally involves animation of cameras in walkthrough, panaround or flyover movies to give the client a much richer and more informative view of the design. This tutorial covers the basics.
Popularity: 11.56 visits per day | Last visit: Today | Total visits: 70,184
Render Scene Dialog
The Render Scene dialog has many settings, only a number of which are commonly used. This tutorial uses the default Scanline Renderer as an introduction to the dialog and settings.
Popularity: 7.01 visits per day | Last visit: Today | Total visits: 42,550
3ds Max Tutorials - Techniques
Creating a Walkthrough
This tutorial shows how to create an animated walkthrough of your AutoCAD 3D model using 3DS MAX 5. All you need to start is an AutoCAD drawing with some 3D content. The end result will be a .AVI file which can be viewed on any Windows PC.
Popularity: 19.17 visits per day | Last visit: Today | Total visits: 129,357
Creating Terrain Objects
This tutorial describes a method for creating terrain objects in 3DS using contours from AutoCAD.
Popularity: 32.6 visits per day | Last visit: Today | Total visits: 219,951
3ds Max Tutorials - Quickscape
Project Overview
This tutorial describes the process of creating a 3D infrastructure and landscape scene from an AutoCAD design drawing using MAX/VIZ and Quickscape application software.
Popularity: 5.57 visits per day | Last visit: Today | Total visits: 33,769
Stage 1: AutoCAD Drawing
In stage 1 on this project, surfaces are created from an accurate landform mesh made from 2D and 3D polylines using Quickscape surfacing routines.
Popularity: 13.98 visits per day | Last visit: Today | Total visits: 84,806
Stage 2: Create Landform Mesh
This tutorial takes AutoCAD groundmodel data and uses it to create a landform mesh in 3ds Max with Quickscape.
Popularity: 3.88 visits per day | Last visit: Today | Total visits: 23,551
Stage 3: Create Surfaces
Production of seamless surfaces for roads, pavements, grassed areas and planting beds is probably the most important stage in the creation of a 3D landscape scene. This tutorial shows you how.
Popularity: 3.89 visits per day | Last visit: Today | Total visits: 23,624
Stage 4: Create Kerbs
Edges are often created using the Loft compound object instead of a simple extrusion to take advantage of the loft mapping parameters. The Loft mapping parameters enable kerb or brick materials to follow the curves of an edge as they do in the real world. In this example a kerb is created using Quickscape Edge Path and Quickscape Edge Section.
Popularity: 3.19 visits per day | Last visit: Today | Total visits: 19,331
Stage 5: Create Houses, Roadlines and Fences
Elements of a scene such as houses are classed as "Objects". Objects are items that sit on the landform terrain or conform to its surface. They are usually positioned in AutoCAD using blocks or lines. This stage describes the process for creating houses (including roofs), fences and road lines.
Popularity: 4.36 visits per day | Last visit: Today | Total visits: 26,452
Stage 6: Lighting and Shadows
Lighting outdoor scenes involves the setup of a Sunlight or Daylight system, together with ambient light. This tutorial uses Quickscape Sunlight and Shadows to automatically setup a Sunlight System with some environment settings and including the use of a Quickscape Light Dome for added natural ambient light.
Popularity: 3.51 visits per day | Last visit: Today | Total visits: 21,307
Stage 7: Setup Views
Quickscape uses ONE camera for still views. This is tied into Image Object functionality where images of people and trees and shrubs are mapped onto planes and "look at" the camera. This tutorial explains how to setup views using Quickscape View Manager.
Popularity: 2.86 visits per day | Last visit: Today | Total visits: 17,373
Stage 8: Assign Materials and Sky background
When surface and edge modelling has been completed and the lighting has been setup correctly, materials can then be assigned to surfaces and edges. This tutorial guides you through the process.
Popularity: 3.49 visits per day | Last visit: Today | Total visits: 21,175
Stage 9: Replace blocks for Lamp Posts and Trees
Simplified blocks for lamp posts and trees in the AutoCAD drawing can now be imported and replaced with 3D models and images using Quickscape Model Objects and Image Objects dialogs.
Popularity: 4.06 visits per day | Last visit: Today | Total visits: 24,618
Stage 10: Add Play Equipment, Vehicles and People
Finally, Quickscape Model Objects dialog is used to add play equipment, cars and vans and Quickscape Image Objects dialog is used to add people. This brings the scene to life and further adds to the sense of scale for the design.
Popularity: 3.68 visits per day | Last visit: Today | Total visits: 22,319
Stage 11: Rendering
In this final stage of the project, views created with the Quickscape View Manager are rendered using Supersampling for best quality.
Popularity: 3.69 visits per day | Last visit: Today | Total visits: 22,388
Other Tutorials - Bryce
AutoCAD to Bryce
This tutorial takes a step-by-step approach to moving your AutoCAD 3D models into Bryce, applying materials and creating a setting.
Popularity: 11.7 visits per day | Last visit: Today | Total visits: 78,919
Importing AutoCAD Meshes to Bryce
This tutorial describes how to create a triangular ground model using Key Terra-Firma and AutoCAD and how to import this ground model into Bryce.
Popularity: 6.89 visits per day | Last visit: Today | Total visits: 46,508
Creating Bryce Picture Objects
The CADTutor Image Bank image pairs can be used to create Picture Objects in Bryce. This short tutorial tells you how this is done in 7 simple steps.
Popularity: 4.96 visits per day | Last visit: Today | Total visits: 33,474
Keyframe Animation
This tutorial gives a basic but comprehensive introduction to keyframe animation in Bryce and introduces some key concepts in animation generally.
Popularity: 6.62 visits per day | Last visit: Today | Total visits: 44,684
Animating Materials: Water
Just about everything in the Brycean world can be animated, including materials. This tutorial shows you how to simulate ripples on the surface of a standard Bryce water material by modifying the offset and rotation of the texture component of the material.
Popularity: 6.36 visits per day | Last visit: Today | Total visits: 42,941
Other Tutorials - Photoshop
Creating Seamless Tiles
This tutorial shows you how to create perfectly seamless image tiles in Photoshop. The image tiles are perfect for creating image based materials in AutoCAD, MAX or Bryce.
Popularity: 12.11 visits per day | Last visit: Today | Total visits: 81,680
Creating Selections from Image Masks
This simple 7-step tutorial describes the best method for using the images supplied in the CADTutor Image Bank.
Popularity: 10.51 visits per day | Last visit: Today | Total visits: 70,936
AutoCAD to Photoshop
This tutorial demonstrates a number of workflows from quick and simple to high quality.
Popularity: 64.62 visits per day | Last visit: Today | Total visits: 435,947
Other Tutorials - PowerPoint
Playing MP3 Files during a Slide Show
This tutorial explains how to play MP3 files during a PowerPoint slide show and how to control when and how sounds are played.
Popularity: 12.12 visits per day | Last visit: 18th Nov 2022 | Total visits: 81,777
Converting Audio CD tracks to MP3 Files
This tutorial explains how to rip CD tracks to MP3 files, ready for playing within a PowerPoint slide show.
Popularity: 4.71 visits per day | Last visit: Today | Total visits: 31,765
Other Tutorials - Web Design
Creating an Image Rollover
This tutorial demonstrates the best way to create image rollovers in Microsoft FrontPage. It also shows some variations on the basic technique along with some examples of how it could be used.
Popularity: 8.24 visits per day | Last visit: Today | Total visits: 55,611
Publishing your Website
This tutorial explains how publish your website from within Microsoft FrontPage.
Popularity: 3.26 visits per day | Last visit: Today | Total visits: 21,993
Uploading Files with SmartFTP
This tutorial guides you through the process of uploading your website files to a web server using the SmartFTP client.
Popularity: 3.48 visits per day | Last visit: Today | Total visits: 23,460
Uploading Files with WS_FTP
This tutorial guides you through the process of uploading your website files to a web server using the WS_FTP client.
Popularity: 3.76 visits per day | Last visit: Today | Total visits: 25,358
Setting up your own free Web Space
Getting your website online could cost you nothing. This tutorial explores the various options for free web hosting.
Popularity: 4.62 visits per day | Last visit: Today | Total visits: 31,159
Getting yourself a Domain Name
After you've built your website, you'll want an address where people can find it. This tutorial describes how to go about getting your own domain name.
Popularity: 3.33 visits per day | Last visit: Today | Total visits: 22,467
Local Navigation
Featured Tutorial
AutoCAD 2010: Subobject Editing with Filters
This tutorial introduces the subobjects (Face, Edge and Vertex), describes how best to select them and demonstrates how they can be edited. Running time: 15min 56sec
Sponsored Links
The Basics
- Dual Dimensions in a Dim…
- UCSICON Options
- "Best of" Basics: Irreg…
- Tool Palette Basics
- Original Dimension Value
- Possible Solutions to th…
- Avoid Using 'Standard' i…
- Shorten the Plot Scales…
- Update the Source File B…
- User Increment Angles fo…
- Drawing Information
- 'Sign Language'
- Rotate with the Copy Opt…
- Use the INSERT Osnap on…
- To or From the Current L…
